24-Inch Single-Zone Wine Cooler by KingsBottle
Combining practical wine preservation with a sleek, space-saving design, this built-in wine cooler is a great addition to contemporary kitchens, residential bars, and social gathering areas.
Equipped with a single temperature zone, it maintains uniform cooling throughout the interior, allowing wine enthusiasts to store their preferred selection of red or white wines at a consistent temperature.
The integrated under-counter construction fits seamlessly into kitchen cabinetry and bar settings, creating an uncluttered look while keeping bottles neatly arranged and within easy reach.
Perfect for homeowners looking for a compact wine storage appliance that delivers dependable temperature management, convenient bottle organization, and a polished appearance.
Cooling & Performance Specifications
|
Specification |
Details |
|---|---|
|
Bottle Capacity |
46 Bottles |
|
Temperature Zones |
Single-Zone Cooling |
|
Temperature Range |
35°F–54°F (2°C–20°C) |
|
Compressor Type |
Embraco Inverter Compressor |
|
Cooling System |
Compressor Cooling with Forced-Air Convection |
|
Operating Ambient Temperature |
50°F–100°F (10°C–38°C) |
Construction & Features
|
Specification |
Details |
|---|---|
|
Door Type |
Low-E Glass Door |
|
Interior Lighting |
Selectable White, Blue, or Dynamic Color-Cycling LED Lighting |
|
Lighting Control |
Manual On/Off Button with Automatic Activation When the Door Opens |
Electrical & Dimensions
|
Specification |
Details |
|---|---|
|
Interior Volume |
5.12 cu. ft. (145 Liters) |
|
Noise Level |
39 dB(A) Sound Power (EN 60704) |
|
Product Weight |
52 lbs |
|
Energy Consumption |
150 kWh per Year |
|
Energy Certification |
ETL / DOE Certified |
|
Electrical Requirements |
110–115V / 60Hz |
|
Defrost System |
Automatic Defrost |
|
Product Dimensions (W x D x H) |
23.43" W x 22.76" D x 34.06" H (595 x 578 x 865 mm) |
Installation Requirements & Specifications
|
Specification |
Details |
|---|---|
|
Installation Type |
Built-In or Freestanding Installation |
|
Ventilation Requirement |
Front-Venting Design – Suitable for Built-In Cabinet Installation |
|
Installation Clearance |
Allow at least the minimum cutout dimensions specified in the installation diagram. Additional clearance is not required for ventilation but provides sufficient space to slide the unit in and out during installation and servicing without damaging the power cord. |
|
Power Outlet Clearance |
If the electrical outlet is located behind the unit, allow at least 1-3/8" (35 mm) between the outlet face and the back of the unit to accommodate the angled plug. Alternatively, position the outlet in an adjacent cabinet. |
|
Cabinet Clearance |
When installing between frameless cabinets, a 1/2" (12 mm) filler strip or side panel may be required on the hinge side to allow the door to open fully. |
|
Installation Surface |
Install on a level surface for proper operation. |